Bottom Tailgate Release

RH Corner Post Showing Top & Bottom Tailgate Relea

Tailgate Release Lever Cammed Forward To Close

Tailgate Release Lever Cammed Rearward To Open

Drop Side Center Hinge Showing No Tools Removal

TC-420 ZEUS on F-450

TC-420 ZEUS 21,400 LB Rated Hoist

Lowering Drop Side

TC 425 ZEUS FOR ISUZU

Drop Side Down 180 Degrees, Tailgate Down 90 Degre

All Stainless Steel Tailgate Release

ZEUS OFFERS A HOIST RATING FOR YOUR CHASSIS

ZEUS WITH OPTIONAL DROP SIDES

WORKMANSHIP & FEATURES YOU EXPECT FROM TRUCKCRAFT

A ZEUS TO FIT YOUR ONE TON CHASSIS

NEW FUEL SAVING ONE TON DUMP BODY

TC 425 ISUZU BODY UP

TC 425 SIDE VIEW

Drop Sides End Hinge & Latch

TC-420 AND TC-160

3/4 HP AUGER DRIVE

TC-420 HOIST

PROPER TAILGATE POSITION

ZEUS REAR W/ TC-160

CHARGING LID OPEN

STAINLESS AUGER

TC-420 ZEUS SIDE

Right Side Down 180 Degrees, Tailgate Horizontal

ZEUS W/ TC-160

Stainless Steel Drop Sides Rotating Latch

CHARGING LID CLOSED

50 DEGREE DUMP ANGLE

ZEUS ON F-350 SIDE VIEW

Current Cab Guard

Drop Sides Latch

Drop Sides Latch Handle & Linkage Rod

1.25″ Dia Stainless Steel Tailgate Pin & Release

ZEUS CABGUARD & TARP

TC-420 ZEUS
TC-400 SERIES ZEUS
The new ZEUS one-ton dump body for up to 19,000 LB GVWR chassis, will permit you to haul up to 500 lbs more each load because ZEUS’s robust aluminum construction saves 500 lbs over like-sized steel bodies with equivalent hoist ratings.

Never sandblast or re-paint your one-ton steel dump body again to try to get another few years out of it. The new ZEUS will stay looking sharp with little maintenance, and you will be able to move it to a new chassis someday without having it crumble apart because of all-too-familiar cancer rust. Saltwater boats, aircraft and automotive applications have demonstrated time and again that if selected properly, aluminum will withstand saltwater and moisture corrosion much better than steel without costly paint maintenance. According to The Aluminum Association’s website, www.aluminum.org , “Automotive and light truck applications accounted for almost 6 billion pounds of aluminum shipments in 2006.” That’s a lot of rolling aluminum, and TruckCraft knows how to design and build rugged and durable products using aluminum!

If clean design and well executed workmanship, rugged but easy-to-use controls and latches, 500 lb weight savings over steel, maintenance free appearance, are things you want, see the ZEUS all-aluminum body at your local TruckCraft dealer today.

TC-410 SPECIFICATION
Chassis: 12,000 to 15,000 GVWR, 60” C.A.
Bed Size: 96” wd. X 9’-4” lg.
Side Height: 16-1/2”, (permanent or drop 180°)
Tailgate Height: 22-1/2” (drop 180°)
Volume Capacity: 3 1/3 cu yds to top of sides
Hoist Rating: 10,400 lb
Floor Height: 11-1/8” above truck frame
Cab Guard: Quarter or Half, bolt on
Weight: 1,240 lbs (assembled w/ hoist, 1/2 cab guard & drop sides)
Max Dump angle: 50°
Flr Const: 1/8” thick 6061-T6 heat treated aluminum extrusions w/ crossmembers every 5”
Operating System: Monarch electric/hydraulic power unit – Double acting
Lighting: Lights and wiring harness factory installed
Warranty: Two years
TC-420 SPECIFICATION
Chassis: 14,000 to 19,000 GVWR, 60” C.A.
Bed Size: 96” wd. X 9’-4” lg.
Side Height: 16-1/2”, (permanent or drop 180°)
Tailgate Height: 22-1/2” (drop 180°)
Volume Capacity: 3 1/3 cu yds to top of sides
Hoist Rating: 21,400 lb
Floor Height: 13-3/8” above truck frame
Cab Guard: Quarter or Half, bolt on
Weight: 1,690 lbs (assembled w/ hoist, ½ cab guard & drop sides)
Max Dump angle: 50°
Flr Const: 3/16” thick 6061-T6 heat treated aluminum extrusions w/ crossmembers every 5”
Operating System: Monarch electric/hydraulic power unit – Double acting
Lighting: Lights and wiring harness factory installed
Warranty: Two years
TC-430 SPECIFICATION
Chassis: 14,000 to 19,000 GVWR, 84” C.A.
Bed Size: 96” wd. X 11′ lg.
Side Height: 16-1/2”, (permanent or drop 180°)
Tailgate Height: 22-1/2” (drop 180°)
Volume Capacity: 4 cu yds to top of sides
Hoist Rating: 16,600 lb
Floor Height: 13-3/8” above truck frame
Cab Guard: Quarter or Half, bolt on
Weight: 1,850 lbs (assembled w/ hoist, 1/2 cab guard & drop sides)
Max Dump angle: 50°
Flr Const: 3/16” thick 6061-T6 heat treated aluminum extrusions w/ crossmembers every 5”
Operating System: Monarch electric/hydraulic power unit – Double acting
Lighting: Lights and wiring harness factory installed
Warranty: Two years

OPTIONS (All Models)
1/2 or 1/4 Cabguard
Rigid or Drop Sides
Deduct Avail for No Hydraulic Pump, Hose, Power Cables

TC-420 ZEUS FLYER
TC-425 ZEUS for ISUZU
TC-410 OWNER’S MANUAL
TC-420 OWNER’S MANUAL
TC-430 OWNER’S MANUAL

For more information click here to view the official TruckCraft Body website –>